Learn how to terminate unleased and leased subnets from the IPXO platform using these comprehensive guides. Use the shortcuts below to select whether you wish to terminate unleased or partially/fully leased subnets.

Terminate unleased subnets

Step 1: Log in to the IPXO Portal 

Go to IPXO Portal, enter your login credentials and click Log In. 

Step 2: Select the subnet for termination  

Click Monetize in the menu at the top and click My Monetized IPs. Identify the subnet you wish to terminate, click the three dots icon on the right and then click Terminate. 

Terminate an unleased subnet

Step 3: Terminate the subnet  

Click Terminate in the Subnet termination request pop-up. 

How to confirm unleased subnet termination request

Terminate partially/fully leased subnets

If an IP holder has a partially/fully leased subnet, they can Request a Termination and initiate the removal of the subnet after 90 days.

Note: This does not apply to subnets that are part of custom lease agreements between IP holders and IP lessees.

Step 1: Log in to the IPXO Portal 

Go to IPXO Portal, enter your login credentials and click Log In. 

Step 2: Select the subnet for termination  

Go to Monetize in the menu at the top and click My Monetized IPs. Identify the subnet you wish to terminate, click the three dots icon on the right and then click Request a Termination. 

How to Request a Termination in the Subnets menu

Step 3: Terminate the subnet  

Click Terminate in the Subnet termination request pop-up. 

How to confirm leased subnet termination request

Note: Once you initiate the Request a termination action, you cannot revoke it. Immediately after the request initiation, the IP lessee will receive an email informing them about the leased subnet's termination. 

After subnet's termination initiation, the termination date will be visible in the main Monetized IPs tab.

Subnet's termination date in the Monetized IPs tab

Note: It is not possible to lease unleased parts of the subnet via the Marketplace if the subnet is set for termination. Subnet termination conditions are subject to the IPXO Terms of Service agreement. 

Please refer to our Terms of Service agreement for more information. If you have any questions or require assistance, please contact IPXO Support. 

Removing IPXO credentials

When you verify your subnet, you need to set IPXO credentials. Subsequently, if you choose to remove IPs from the IPXO Marketplace, you need to remove these credentials.

  • ROA and Route Object (IRR)

Please delete ROA and Route Object (IRR) with AS834. You can check valid ROAs of your subnet here or here.

If you stop leasing your subnet with IPXO, you can also delete all additional ROAs and Route Objects created during the lease period.

  • Abuse-c

Delete/change the abuse-c contact from [email protected] to your own.

  • Nameserver delegations

Delete/change our nameservers ns1.ipxo.com and ns2.ipxo.com to your own.