IPXO’s goal is to make the leasing of IP addresses as fast and easy as possible. We aim to make this an enjoyable experience for our clients, and this is why we employ automation to supervise and prepare subnet ranges. 

If you want your subnets verified in the IPXO Marketplace, you have to prepare subnet ranges for it. Continue reading this article to learn how to prepare your subnet for the IPXO Marketplace.  

Note: Some changes described below require the subnet to be placed in the Marketplace for validation. Therefore, it is best to start the process by registering at the IPXO Portal, adding the IPs to the Marketplace and then making the changes described below. 

Step 1: Check supported inetnum statuses

Before you place your subnet to the IPXO Marketplace, check if your subnet has the right status.

AFRINIC inetnum status

This table shows which statuses are acceptable if you want to add subnets to the IPXO Marketplace from AFRINIC. 

Inetnum Status Action 
Sub-Allocated PA Authorize by adding netutils-mnt as mnt-by 
Allocated PA (mask = 24) Unsupported
Allocated PA (mask < 24) Create a more specific inetnum with Assigned PA status and add netutils-mnt as mnt-by 
Assigned PA Authorize by adding netutils-mnt as mnt-by 
Legacy Unsupported

APNIC inetnum status

This table shows which statuses are acceptable if you want to add subnets to the IPXO Marketplace from APNIC. 

Inetnum Status Action 
Allocated Portable (mask = 24)Unsupported 
Allocated Portable (mask < 24)Create a more specific inetnum with Allocated Non-Portable status; authorize by adding IPXO generated mnt-by
Allocated Non-Portable Authorize by adding IPXO generated mnt-by 
Assigned Portable Unsupported 
Assigned Non-Portable Unsupported 
Legacy Unsupported 

ARIN nettype status 

This table shows which statuses are acceptable if you want to add subnets to the IPXO Marketplace from ARIN. 

NetType Action 
Direct Allocation Reallocate to Internet Utilities NA LLC (OrgID: DCL-577)
Direct Assignment Unsupported: To change your Direct Assignment to Direct Allocation, open a ticket and request the change of the status
Reassigned Unsupported 
Reallocated Supported if reallocated to Internet Utilities NA LLC (OrgID: DCL-577
Legacy Unsupported 

LACNIC inetnum status

This table shows which statuses are acceptable if you want to add subnets to the IPXO Marketplace from LACNIC. 

Inetnum Status  Action 
Direct Allocation Reallocate to IPXO Ltd. OrgID: BZ-IPLT2-LACNIC 
Direct Allocation (=/24) Unsupported 
Allocated Reallocate to IPXO Ltd. OrgID: BZ-IPLT2-LACNIC 
Allocated (=/24) Unsupported 
Legacy Reallocated  Reallocate to IPXO Ltd. OrgID: BZ-IPLT2-LACNIC 
Reallocated (=/24)Unsupported

RIPE inetnum status 

This table shows which statuses are acceptable if you want to add subnets to the IPXO Marketplace from RIPE. 

Inetnum Status Action 
Sub-Allocated PA Authorize by adding netutils-mnt as mnt-by 
Legacy Unsupported
Allocated PA (mask = 24) Authorize via ROA and by adding netutils-mnt as mnt-lower, mnt-domains, mnt-routes
Assigned PA Unsupported: Recreate the inetnum with a Sub-Allocated PA status
Allocated PA (mask < 24) Create a more specific inetnum with Sub-Allocated PA status and add netutils-mnt as mnt-by 
Assigned PI Unsupported: Here is an official guide from RIPE on how to convert an Assigned PI to an Allocated PA

Step 2: Set ORG abuse contact for the ownership verification

The subnet you add to the Marketplace must have the organization's object abuse contact set if you want to receive the ownership confirmation email. The confirmation of the subnet is proof that you own the IP addresses and that you have been assigned the subnet. 

To set up the ORG abuse contact (abuse-c) on the inetnum, follow the instructions in these articles:

Step 3: Set the abuse contact 

Before you upload a subnet to the IPXO Marketplace, make sure you have added our abuse contact in RIPE (AR834).

To set up the abuse contact (abuse-c) in WHOIS as [email protected], follow the instructions in these articles: 

Step 4: Check if the subnet is not blocklisted

Make sure that your subnet is not listed in any abuse blocklists. The IPXO Marketplace will only accept clean IP ranges. If your subnet is blocklisted, remove it from the list before adding it to the Marketplace. 

Here are a few examples of tools that you can use to inspect your IP ranges: 

Here's an example of 193.84.111.1 inspected using the Talos Intelligence Lookup tool. This subnet is clean. 

Screenshot of Cisco Talos Intelligence Lookup tool webpage.
Talos Intelligence Lookup tool

Step 5: Add IPXO as the resource maintainer

To enable automation, you need to edit the WHOIS information of the subnets you have placed in the IPXO Marketplace.  

In RIPE and AFRINIC, add our maintainer (netutils-mnt) as the mnt-by attribute to enable us to automate IP resource management. If the subnet is =/24 and has the Allocated PA status, add us as mnt-lowermnt-route, mnt-domains

You can find more information about this using the following guides: 

In ARIN, you need to reallocate networks (subnets) to the organization OrgID: DCL-577

Step 6: Check subnet announcement 

The last step before you prepare subnet ranges for the IPXO Marketplace is to make sure that the subnet is not announced. 

You can check if your subnet is announced using these three tools:  

Screenshot of Deft Looking Glass webpage.
Deft Looking Glass
Screenshot of Telia Looking Glass webpage.
Telia Looking Glass
Routing History dashboard in the RIPEstat Home menu.
RIPE's Routing History

If you have any questions, please contact our Customer Support team via help.ipxo.com

Learn more